At Nasir Nickel Alloys in Manama, Bahrain, Inconel 800H Bars are designed to provide exceptional performance in high-temperature and corrosive environments. Engineered from a nickel-iron-chromium alloy with carefully controlled carbon content, these bars offer superior creep and stress-rupture resistance compared to standard Inconel 800. They are highly reliable in applications requiring long-term thermal stability, oxidation resistance, and mechanical strength. Inconel 800H Bars ensure dependable performance in industrial systems subjected to prolonged heat, pressure, and corrosion, making them a preferred choice for power generation, chemical processing, and high-temperature engineering applications.
Inconel 800H Bars are composed primarily of nickel, iron, and chromium, with controlled carbon levels to enhance creep resistance. The alloy provides excellent tensile and yield strength at elevated temperatures, along with outstanding oxidation and corrosion resistance. These bars maintain dimensional stability and mechanical integrity during thermal cycling and prolonged heat exposure. Inconel 800H exhibits superior resistance to scaling, carburization, and chloride stress-corrosion cracking. Its toughness and ductility allow for reliable fabrication and long-term performance under high thermal and mechanical loads.
| Standards : | ASTM B408, ASME SB408 |
| Dimensions : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Wire : | Thickness starting from 0.05mm |
| Round bar size : | Diameter: 3-~800mm |
| Hex Bar size : | 2-100mm A/F |
| Flat bar size : | Thickness: 2 -100mm / Width: 10 to 500mm |
| Square bar size : | 4 to 100mm |
| Rectangular Bars Size : | 33 x 30mm to 295 x 1066mm |
| Hollow Bar : | 32mm OD x 16mm ID to 250mm OD x 200mm ID |
| Tolerance : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Finish : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| 800H | 0.05 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa – 205 | 30 % |
At Nasir Nickel Alloys, we take pride in being the largest supplier, exporter, and manufacturer of Inconel 800-H Bar in Manama, Bahrain, providing cutting-edge solutions for all your piping needs. Our state-of-the-art production plants are strategically located in the Bahrain, allowing us to maintain a vast inventory of over 16,000 tons of premium-quality materials readily available in stock. We are dedicated to delivering superior products and services, ensuring reliability and excellence for our global clientele.
Contact us to get a quick quote for your requirement.
Inconel 800H Bars are widely used in high-temperature industrial applications requiring creep and thermal stability. They are commonly employed in furnace components, heat exchangers, boiler tubes, and superheater assemblies. Petrochemical and chemical processing industries use them in reactors, reformers, and high-temperature piping systems. Power generation facilities rely on Inconel 800H Bars for turbine components, boiler systems, and thermal processing equipment. Their resistance to oxidation, carburization, and mechanical fatigue makes them ideal for long-term operation in extreme environments. These bars ensure secure and reliable performance in demanding high-temperature and corrosive conditions.
